Glens Falls winters are long, cold and snowy, and most homes in and around the city lose heat fast through uninsulated attics, drafty rim joists and thin or missing wall insulation. Albany Spray Foam Insulation has been sealing and insulating Glens Falls homes since 2013, stopping the air leaks that drive heating bills up and keeping cold from creeping into bedrooms and living spaces all winter long.
Whether your home is a solid early-1900s frame house with a full basement and open rim joists, or a newer colonial on the edge of town, the cold finds its way in through the same routes: the attic above, the rim band where the foundation meets the house frame, and the walls themselves. We know Glens Falls. We know what works here, and we show up with a crew that stays until the job is done right.
Spray Foam Insulation in Glens Falls (12801)
Glens Falls sits in IECC climate zone 5A, cold and humid, where winter vapor drive pushes warm, moist indoor air into attics and walls where it hits cold surfaces and condenses. That moisture, combined with open rim joists and uninsulated cavities, is the engine of the heating bill. Most homes here sit over full basements with brick or stone foundations, rim joists that are either open to the outside or insulated with fiberglass that has settled and failed. Attics range from tight, shallow roof cavities in older frame houses to larger, vented spaces in postwar ranches and colonials, and many have no insulation at all or only a thin layer of blown fiberglass that has compressed over decades.
Spray foam insulation solves these problems by filling cavities completely, sealing air leaks, and creating a continuous air barrier that stops the cold and the moisture drive. Closed cell foam is dense and moisture-resistant, ideal for rim joists, crawl spaces and walls where vapor control matters. Open cell foam is less expensive and works well in attics where vapor can move freely and moisture is not trapped. Our team has been installing both in Glens Falls and the Albany area for over a decade. We know the building stock, the code that governs the work, and the inspection process the city requires.
Our services in Glens Falls
- Attic Spray Foam Insulation in Glens Falls · Albany attics sit under climate zone 5A winters…
- Closed Cell Spray Foam Insulation in Glens Falls · Albany basements often have open rim joists in stone or brick foundations that…
- Open Cell Spray Foam Insulation in Glens Falls · Open cell foam fills deep stud bays in postwar capes and colonials around…
- Wall & Injection Foam Insulation in Glens Falls · Albany's nineteenth-century brick rowhouses in Center Square often have…
- Crawl Space Spray Foam Insulation in Glens Falls · Many homes around Delmar and Bethlehem sit on crawl spaces where cold…
- Rim Joist & Band Joist Spray Foam in Glens Falls · Open rim joists above old stone and brick foundations let cold winter air leak…
- Garage Spray Foam Insulation in Glens Falls · Detached garages across Colonie and Guilderland often sit uninsulated through…
- Metal Building & Barndominium Spray Foam in Glens Falls · Metal buildings and barndominiums around Montgomery and Saratoga counties sweat…
- Commercial & New Construction Spray Foam in Glens Falls · Small commercial buildings scattered through the Capital Region face the same…
- Insulation Removal in Glens Falls · Old attics in Pine Hills and Center Square often hold damaged insulation soaked…
- Insulation Replacement & Re-Insulation in Glens Falls · After ice dam damage or decades of settling…
- Air Sealing in Glens Falls · Stack effect pulls heated air up through old plaster ceilings and rowhouse…
How a Job Works in Glens Falls
We start with a free on-site visit to your home. We look at the attic, crawl space, rim joists or walls you want to insulate, measure the area, and talk through what you are seeing: cold spots, high bills, moisture, or insulation that has failed. We ask about your building, your comfort goals and your budget. We leave with enough information to write a detailed estimate with R-value and thickness specs, so you know exactly what you are getting and what it will cost.
When you are ready, we schedule the work. Most jobs take a day or two. We set up mechanical ventilation during the spray and cure process, because proper air flow during curing is not optional. If insulation has to come out first, we remove it safely and haul it away. We mask and protect areas that should not be sprayed. We apply the foam in controlled passes, checking thickness and coverage as we go. Once the foam is cured, we trim excess material and leave your attic, crawl space or walls clean and ready for drywall, flooring or whatever comes next.
We clean up as we go and do a final walkthrough with you before we leave. Your property is left clean, and you have a written record of what was installed, where, and to what thickness and R-value.
Attic spray foam in Glens Falls typically runs from $1.50 per square foot for open cell foam on top of existing insulation, to $2 or more per square foot for closed cell or deeper applications. A 1,200 square foot attic with six inches of open cell foam usually falls in the $1,800 to $2,400 range. Rim joist and band joist sealing starts around $650 for a small section and scales with the length of the rim. Wall injection foam for closed cavities runs from $2 per square foot of wall area. Crawl space foam starts at $2,500 and depends on the size and condition of the space. If insulation has to be removed first, add $950 to $1,500 for removal and haul-away. The final price depends on the square footage or board footage to be covered, the R-value and thickness you want, whether you choose open or closed cell, what existing insulation has to come out, and how easy access is to the space. Call us at (838) 217-7813 for a free estimate with real numbers for your home.
✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Glens Falls and nearby areas.