Serving the Albany area  ·  (838) 217-7813  ·  Open Mon-Sat 7am-6pm
📞 (838) 217-7813 Free Quote

Spray Foam Insulation in Albany, NY (12206) · Local Professionals

Albany Spray Foam Insulation · Fast response in Albany and the Albany area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+41Verified Reviews
13Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Albany's rowhouses, Victorians and early-1900s colonials sit over stone basements with open rim joists, under shallow roof cavities that sweat condensation all winter and bake in summer heat. Most homes have never had consistent air sealing or cavity insulation, so heating bills climb and rooms over garages stay cold no matter what the thermostat says.

We've been insulating Albany homes and commercial spaces since 2013. Homeowners in Center Square, Pine Hills and along the Helderberg call us when their attics are damp, their rim joists leak cold air, or their old plaster ceilings can't keep up with the heating season. Our team knows the building stock here, the moisture challenges that come with it, and how to seal and insulate the spaces that actually matter.

Spray Foam Insulation in Albany (12206)

Albany's housing stock tells the story of why spray foam works here. Nineteenth-century brick rowhouses share party walls and have shallow roof cavities that collect moisture from warm indoor air hitting cold masonry in winter. Early-1900s frame houses and postwar colonials and ranches spread through Colonie, Guilderland, Bethlehem, Delmar, Latham and Niskayuna sit over full basements, many with old stone or brick foundations and open rim joists that bleed cold air all winter long. Most of these homes were built before insulation standards existed, so cavities in exterior walls are either empty or filled with settled, damp fiberglass that no longer works.

We're in climate zone 5A, cold and humid, with heating-dominated winters and heavy snow that builds ice dams on low-slope roofs. Summer brings hot, humid stretches that turn top-floor rowhouse units into ovens. Winter vapor drive pushes warm, moist indoor air into attics and exterior walls, where it condenses on cold surfaces. That moisture, combined with drafty rim joists, uninsulated frame walls and open stone foundations, drives most of the heating bill across Albany and the surrounding counties. Spray foam stops air leaks and provides a continuous air barrier that fiberglass and cellulose cannot match. Closed cell foam adds structural rigidity and handles moisture better in damp crawl spaces and rim joists. Open cell foam works well in attics where vapor permeability matters and cost is a factor. We size the job to the space, the climate, and what actually needs to be fixed.

Since 2013, our fully insured team has sealed attics, crawl spaces, rim joists, closed walls and metal buildings across Albany and the surrounding area. We show up on time, do the work right, and leave your property clean.

Our services in Albany

How a Job Works in Albany

We start with a free on-site assessment. We walk your attic, crawl space or rim joist, take measurements, and talk through what you're seeing: cold rooms, high bills, damp insulation, condensation on windows or in the attic. We ask about your heating and cooling history, any moisture or smell, and what you've tried before. We explain what we can fix with spray foam and air sealing, what has to be removed first, and what doesn't apply to your house. No high-pressure sales, no made-up urgency. We write a detailed estimate with R-value and thickness specifications so you know exactly what you're paying for.

When you're ready, we schedule the work around your schedule. Most attic and rim joist jobs take a day or two. If old insulation has to come out first, we remove it safely and haul it away. We set up mechanical ventilation during the spray and cure, so odor stays outside and your home stays safe. We spray to the thickness and coverage specified in your estimate, check our work, and clean up before we leave. If you're home during the work, we'll walk you through the re-entry window (typically twenty-four to forty-eight hours) so you know when the space is ready to use again.

We don't spray over wet, moldy or contaminated substrates. If we find moisture that has to be fixed first, we tell you straight: we fix the moisture or we walk away. That honesty is what keeps jobs on schedule and keeps your home safe.

Pricing for spray foam insulation in Albany depends on the area to cover, the R-value and thickness you need, whether you're using closed cell or open cell foam, and what has to be removed or prepared first. Attic foam typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on depth and coverage. Wall and injection foam runs from $2 per square foot. Crawl space work starts around $2,500 and includes rim joist sealing. Rim joist and band joist sealing alone runs from $650 on up. Garage insulation starts at $1,200. If you have old, damp or contaminated insulation that has to come out first, removal runs from $950 and replacement from $2,800. We also handle air sealing around foam work, starting at $650. The best way to know what your job will cost is to call us at (838) 217-7813 for a free estimate. We measure on site, specify the thickness and R-value in writing, and give you a firm price before we start.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Albany and nearby areas.

I have a rowhouse in Center Square with a cold, damp attic and ice dams every winter. What does spray foam do that my old insulation doesn't?
Old fiberglass or cellulose insulation in a rowhouse attic doesn't stop air leaks, and it absorbs moisture from the warm, humid air inside your home. In winter, that moisture condenses on cold surfaces and the insulation gets damp and stops working. Spray foam seals all the air leaks around your plumbing vents, electrical penetrations, and the edges of your roof cavity, so warm air doesn't escape and cold air doesn't come in. It also creates a continuous air barrier that prevents moisture from moving into the attic in the first place. Closed cell foam is denser and handles moisture better if your attic has a history of dampness. The result is a warmer attic, fewer ice dams, and lower heating bills. We'll assess your attic and tell you whether closed cell or open cell foam makes sense for your roof pitch and ventilation setup.
We found wet insulation and a smell in our crawl space under a Pine Hills house. Do we need to remove it before you spray?
Yes. We don't spray foam over wet, moldy or contaminated insulation. If your crawl space has standing water, active leaks, or mold growth, those have to be fixed first. We can remove the old insulation and haul it away, but if there's standing water or a structural leak, you'll need to address that before we seal and insulate. Once the moisture source is stopped and the space is dry, we spray closed cell foam on the rim joists, band joists and rim band, and seal the rim joist cavity. Closed cell foam is the right choice for crawl spaces because it's vapor-resistant and handles the damp conditions common in Albany basements. Call us at (838) 217-7813 and we'll walk through what needs to happen first.
How much does it cost to spray foam an attic in Albany?
Attic foam in Albany typically runs from $1.50 per square foot for open cell foam to higher per-board-foot rates for closed cell, depending on the depth and R-value you need. A 1,200-square-foot attic might run anywhere from $1,800 to $4,000 or more, depending on whether you're topping up existing insulation or starting from scratch, and whether old insulation has to come out first. The key factors are the area, the target R-value, whether you need closed cell or open cell, and what prep work is needed. Call us at (838) 217-7813 with your square footage and we'll give you a realistic range and schedule a free on-site estimate.
Who inspects spray foam insulation in Albany and what R-value do I need?
The City of Albany building official enforces the energy code and building code at your address, and they set the R-value requirements for your attic, walls and crawl space. Those requirements change based on the year your house was built and any renovations you've done. The code also governs the ignition barrier and thermal barrier on spray foam, and the fifteen-minute thermal barrier is the specification most installers get wrong. We follow the code that applies at your address and we write the R-value and thickness into your estimate so the inspector knows exactly what we installed. If you need a permit, the City of Albany website has information on permits and contractor registration for your neighborhood. We help you navigate what applies at your address, but the building official has the final say.
Can we stay in the house while you spray foam the attic?
Yes, but we need to manage the odor and ventilation carefully. We set up mechanical ventilation during the spray and cure so the smell stays outside and your home stays safe. The typical re-entry window is twenty-four to forty-eight hours after the last pass is sprayed. We'll tell you exactly when the space is ready to use again. If you have young children, pets or anyone with respiratory sensitivities, let us know when you book the job so we can plan the ventilation and re-entry window around your household. We want you comfortable and safe in your own home.
Are you fully insured to do spray foam work at my Albany home?
Yes, we are fully insured with general liability and workers' compensation coverage. If you want to verify our insurance, we're happy to provide proof before we start work. Insurance protects you and us if something goes wrong on the job, and it's a basic requirement for any contractor working on your home.
When should I schedule spray foam insulation work in Albany? Is there a best time of year?
The best time is fall or early winter, before the heating season really kicks in and your bills spike. If you're noticing cold rooms, drafts, or high heating bills in November or December, that's the signal to call. We can often fit jobs in quickly in the fall. Summer is quieter, so if you want to avoid the rush and you're not in a hurry, scheduling in June or July can work. The worst time is mid-winter during a cold snap, because the moisture risk is highest and the work is harder on your home. If you're dealing with damp insulation or condensation right now, call us at (838) 217-7813 and we'll assess whether it's urgent or can wait until the weather breaks.
Why choose us?

Trusted professionals since 2013

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Albany

All your work handled by qualified professionals in Albany

Attic Spray Foam Insulation

Attic foam built for Albany's cold winters and ice dam season

Included in your service

  • Shallow rowhouse roof deck foam for Center Square attics
  • Ice dam prevention under low-slope Pine Hills roofs
  • Sealing around old plaster ceiling penetrations in Albany attics
  • Air sealing for Helderberg-area top floor units
Learn more→

Closed Cell Spray Foam Insulation

Closed cell foam for Albany's rim joists and old frame walls

Included in your service

  • Rim joist sealing for stone and brick Albany foundations
  • Closed cell fill for uninsulated frame walls in Guilderland
  • Moisture control against zone 5A winter vapor drive
  • Board foot pricing noted for Capital Region basements
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for Capital Region frame walls and rowhouses

Included in your service

  • Stud bay fill for postwar Niskayuna and Latham homes
  • Party wall sound control in Pine Hills rowhouses
  • Attic plane fill under shallow Albany roof decks
  • Board foot estimate for zone 5A frame construction
Learn more→

Wall & Injection Foam Insulation

Injection foam for Center Square brick party walls

Included in your service

  • Drill and fill injection for brick rowhouse party walls
  • No plaster removal in Center Square or Pine Hills units
  • Cavity fill for early 1900s frame house walls
  • Air sealing matched to Albany's humid summer swings
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Bethlehem and Delmar foundations

Included in your service

  • Wall foam for open stone and brick crawl foundations
  • Vent sealing against humid Hudson Valley summers
  • Rim joist tie-in above Bethlehem crawl spaces
  • Moisture control for Delmar area pier and beam homes
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist foam for Albany's old stone foundations

Included in your service

  • Band joist foam around stone and brick basement perimeters
  • Air sealing for drafty rim joists in Pine Hills homes
  • Closed cell pass sized for Albany's shallow rim joist bays
  • Ice dam season draft stop at the foundation line
Learn more→

Garage Spray Foam Insulation

Garage foam for Colonie and Guilderland winters

Included in your service

  • Wall and ceiling foam for Capital Region detached garages
  • Draft control through snowy Colonie area winters
  • Workshop comfort in Guilderland and Latham garages
  • Ignition barrier detail noted for Capital Region garages
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for Montgomery and Saratoga counties

Included in your service

  • Interior skin foam for Capital Region metal buildings
  • Condensation control through humid Hudson Valley summers
  • Barndominium wall and ceiling fill near Saratoga
  • Air barrier added for Montgomery County metal shells
Learn more→

Commercial & New Construction Spray Foam

Commercial spray foam across the Capital Region

Included in your service

  • New construction foam for Albany and Columbia County projects
  • Attic and wall foam for small commercial buildings in Albany
  • Rim joist sealing for Capital Region construction phases
  • Free estimate scheduled around zone 5A winter builds
Learn more→

Insulation Removal

Insulation removal for ice-damaged Albany attics

Included in your service

  • Wet insulation pulled from Pine Hills rowhouse attics
  • Rim joist debris cleared in old stone foundations
  • Ice dam damaged material removed before reinsulating
  • Cleanup through tight rowhouse attic access points
Learn more→

Insulation Replacement & Re-Insulation

Full reinsulation for older Albany area attics and walls

Included in your service

  • Old insulation removal before reinsulating Latham attics
  • New foam sized for zone 5A heating-dominated winters
  • Wall and attic reinsulation for Niskayuna area homes
  • Air sealing paired with reinsulation after ice dam damage
Learn more→

Air Sealing

Air sealing for Albany's old rowhouses and rim joists

Included in your service

  • Party wall air sealing in Center Square rowhouses
  • Rim joist sealing for stone and brick foundations
  • Blower door test noted for Albany area homes
  • Draft control through Rensselaer County winters
Learn more→
Verified client reviews

41+ Verified Client Reviews in Albany

⭐⭐⭐⭐⭐ 4.9/5 · 41 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Albany · Response within 24h · No commitment · ☎ (838) 217-7813

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Albany ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm